Technotherm ISP Infrared Heating Panel - Mirror 350w (650 x 650mm)
If you need a heated mirror panel for a bathroom, this Technotherm ISP infrared heater is a superb choice, offering reliable heating as well as a demisting surface. The gentle radiant heat this panel emits is easily absorbed by walls and other surfaces, keeping them warm so that condensation is deterred from settling. It’s a space-saving solution that provides two functions in one and will heat up to 8m².
Please note: Technotherm infrared heating panels require the TPF-Eco thermostat in order to operate.
- Innovative 2-in-1 Heating Solution
- Anti-fog Mirror Surface
- Reduces Condensation & Moisture
- Excellent for Bathrooms
- Ultra-slim 20mm Deep
- High Quality German Engineering
- Rock Wool Insulated for Efficiency
- Robust Steel Body
- Unique Heat Mat for Even Warmth
- Zero Upkeep – No Maintenance Required
- For Wall Mounted Fitting Only
- TPF-Eco Thermostat Required for Operation
- WiFi Control with TPF-Eco & Eco Interface
- 650 x 650 x 20mm (WxHxD)
More Information SKU 12501031 Brand Technotherm Product Weight (kg) 10.2 Depth (mm) 20 Height (mm) 650 Width (mm) 650 Wattage (w) 350 Cable Length (m) 1 IP Rating IP24 Suitable for Bathrooms Zone 2 & 3 IEC Class Protection Class I Room Size - Modern Insulation (m²) 8 Room Size - Poor Insulation (m²) 6.5 Outdoor Heat Area - Max (m²) N/A Outdoor Heat Area - Min (m²) N/A
Manuals & Installation
Technotherm ISP Mirror panels are suitable for DIY installation and are supplied with wall mounting brackets. A 1m cable and UK fitted plug are included as standard, however, the services of a qualified electrician will be needed for a wire-free finish.
This product has an IP24 rating and is suitable for installation in bathroom zones 2 and 3. Any electric heater for use in bathrooms will need to be hard-wired by a professional electrician – it is not a suitable task to undertake DIY. Always defer to the manufacturer’s guidelines about the bathroom suitability of any product.
Please note that mirror panels are not suitable for installation on ceilings due to their greater weight.
Technotherm panels come with in-built wireless receivers so they can be controlled with the Technotherm TPF-Eco Radio Frequency Thermostat. We highly recommend purchasing the Technotherm thermostat to make your heating system as energy-efficient and convenient to use as possible. For an even greater level of control, the Technotherm thermostat can be upgraded to a Wi-Fi control system with the additional purchase of the Technotherm Eco Interface 1.0 Internet Heating Controller. Please note that the Eco Interface cannot be used separately to the Technotherm thermostat – both units will be required to access full Wi-Fi control.
This panel has a heat reach of approximately 2.5 – 3m.
All Technotherm infrared panels come with a 5 Year Manufacturer’s Warranty and a separate 2 Year Manufacturer’s Warranty for the thermostat and receiver.
This item is available with free delivery. Please allow 1 – 3 weeks for the item to arrive.
Orders of multiple items may be shipped on a pallet. If you are ordering multiple different items, we will always endeavour to dispatch your goods together. However, separate dispatches may be necessary if the items you have ordered are being shipped from different locations. Check our delivery page or speak to our customer service team for more information.
Please be aware that delivery times and charges may be increased if you want the items delivered to addresses in the Scottish Highlands & Islands, or outside the UK mainland. This will be calculated when you enter your postcode at the checkout.
What You Will Need
Sporting a sophisticated frameless design, Technotherm ISP Mirror panels provide an unobtrusive heat source that’s ideal for both domestic and commercial interior locations. When installed with a wire-free finish, they’re a camouflaged heating solution that’s practical as well as elegant, blending inconspicuously with the rest of your room décor. This infrared panel is the smallest in the ISP Mirror range and is a great choice for secondary bathrooms or cloakrooms with restricted wall space.
Though mirror panels can be used just about anywhere in the home, they’re particularly useful in bathrooms because their heated surface means that the glass won’t fog up in the same way as a conventional household mirror. No more wiping down mirrors to remove condensation after a hot shower – this infrared panel acts as a demister and will remain completely clear for use even in a steamy environment. Far infrared is also an excellent alternative heating method for damp-prone bathrooms because it keeps the surrounding walls warm and prevents water from condensing. With infrared, you never need to worry about heat loss from extractor fans because radiation heats surfaces and objects rather than the room’s air volume. This makes it an effective solution for spaces with persistent and recurring moisture issues as you can ventilate the space as often as required without losing warmth.
Technotherm infrared panels are manufactured in Germany and designed to be as energy efficient as possible. Unlike other infrared products, these heaters use carbon wiring stitched directly into a unique Matrix Heat Mat, providing a higher and more consistent warmth across each panel surface, whilst also helping to keep the wires fixed firmly into place. This heat-conductive textile mat is able to accommodate up to 10 times more heating wire than other brands to ensure every panel provides uniform and reliable warmth whenever they’re used. Additionally, Technotherm panels are rock wool insulated at the back, an innovative way of preventing any energy from being wasted by heating the wall.
Wall mounting brackets and fittings are provided with every panel and installation can be completed DIY even with minimal experience. Technotherm mirror panels can be used in bathrooms if installed by a professional electrician and their IP24 rating provides them with robust splashproof protection. Every infrared panel in this range has an integrated thermocouple which will cut power to the appliance if it exceeds 120 °C for additional safety. In the unlikely event that the front plate sustains a hard impact, the glass in Technotherm mirror panels is manufactured with a ‘crumble effect’ to reduce risk of injury.
All Technotherm products undergo rigorous checks at every stage of manufacturing to meet their exceptionally high standards and are personally inspected by a quality control manager. They’re so confident in the construction of their products that Technotherm even provide a unique code in their guarantee certificates which helps them to identify who signed-off each individual appliance.
All Technotherm panels come with a 5 Year Manufacturer’s Warranty. Our range of ISP Mirror panels comes in three sizes: 350w, 600w and 750w.
Thermostats & Controllers
What sets Technotherm products apart from other infrared heaters on the market is their wireless receiver integrated into each unit. This means if you want to control your heaters, all you need to do is purchase a Technotherm TPF-Eco Radio Frequency Thermostat – there’s no need to spend money on additional receivers for each unit if you want to expand your heating system. Using the Technotherm RF Thermostat, you can create a bespoke 24/7 heating schedule around your lifestyle and minimise energy usage by limiting when your heaters draw power.
To make the most out of your Technotherm panels, it’s well worth investing in a compatible Technotherm Eco Interface 1.0 Internet Heating Controller, which allows you to control your heaters from any location using an internet enabled device. Adjust your heating system on the way home to ensure it’s warm and inviting when you arrive, or delay your heating schedule if you know you’ll be late home – the TTi heating app provides total heat management with an intuitive user interface. The app can be downloaded via Google Play or the App Store and can control Technotherm heaters in up to 10 different properties. This precise and immediate control over your heating system keeps running costs as low as possible and means the controller will easily pay for itself over time in terms of money saved.
Please note: to use the Technotherm Eco Interface, you will also need the Technotherm RF Thermostat. The Eco Interface cannot be used as a standalone product.
Benefits of Far Infrared
Infrared panels give off most of their heat as far infrared radiation. This is a gentle, natural form of heat which travels at a similar wavelength to the heat given off by our bodies. Far infrared feels gentle but is easily absorbed by our bodies, making it one of the most efficient ways to heat homes and offices. Unlike outdoor infrared products which give off visible light and a more intense form of infrared heat, far infrared remains comfortable for hours on end – a luxurious heating solution that’s ideal for all your main living spaces. Other uses for far infrared include spas, yoga studios and incubators for babies.
Infrared heating is growing in popularity all the time as home and business owners recognise the unique benefits and unparalleled energy efficiency offered by these versatile panels. Radiant heat warms people, objects and surfaces directly, minimising the heat loss through draughts and the circulation of air. Radiant heat allows you to zone your heating, and it can also reduce damp and prevent the circulation of dust – the ideal heating solution for allergy sufferers. The panels are durable, require no maintenance and are the natural choice to pair with solar panels for 100% carbon free heating.